Getting started with bKey - bKey - Battery life is key

Getting started with bKey

iPhone bKey Operating Instructions 

  1. To charge bKey smart phone power bank battery and phone charger, make sure the top cap (the round-end where the smartphone tip is located) is FULLY CLOSED.

  2. Remove the USB cap (the other rectangular end of bKey portable phone charger) and plug it into a USB port on your computer or AC wall adapter. The light will glow red to indicate it is charging.

  3. Once it’s charged completely (takes approximately 1 hour), the light will change from red to blue.

  4. Open the top cap (the round-end where the smartphone tip is located) by gently placing your fingernail underneath the latch pushing upwards on it until it opens. It will get easier to open after several uses. Once the cap is open, a light will glow green indicating that bKey battery is on.

  5. Wait until your phone reaches low battery power and plug in your bKey either logo-side up or logo-side down (depending on which version of iOS you are running) to charge your phone. It can take up to 30+ minutes for bKey to empty its full charge in your phone. bKey's light will shut off completely once it is done charging and out of battery power. You must recharge your bKey again before its next use by following steps 1 to 3.

Note: Some iPhone users must update to the newest iOS version to use their bKey with their iPhone. It is also recommended that you remove bKey from your keychain prior to charging and use with your phone.

For all other technical support inquiries, please email us at support@shopbkey.com

 

 

Micro-USB bKey Operating Instructions 

  1. To charge bKey portable power bank phone charger, make sure the top cap (the round-end where the smartphone tip is located) is FULLY CLOSED.

  2. Remove the USB cap (the other rectangular end of bKey external phone battery) and plug it into a USB port on your computer or AC wall adapter. The light will glow red to indicate it is charging.

  3. Once it’s charged completely (takes approximately 1 hour), the light will change from red to blue.

  4. Open the top cap (the round-end where the smartphone tip is located) by gently placing your fingernail underneath the latch pushing upwards on it until it opens. It will get easier to open after several uses. 

  5. Wait until your phone reaches low battery power and plug in your bKey to charge your phone. It can take up to 30+ minutes for bKey to empty its full charge in your phone. You must recharge your bKey again before its next use by following steps 1 to 3.

Note: It is also recommended that you remove bKey from your keychain prior to charging and use with your phone.

For all other technical support inquiries, please email us at support@shopbkey.com